1ST Detect’s MMS 2000 is a highly selective and accurate process gas monitor designed to provide precise, real-time measurement of specific chemicals in a process stream. It is built for continuous, autonomous monitoring and recording of any excursions or environmental anomalies.

By selecting which ion masses to monitor, the MMS 2000 can continuously report the abundance of a set of chemicals in order to optimize yield or identify out-of-spec conditions. The data is disseminated in accordance with a user‐defined protocol which can be broadcasted to control rooms or mobile phones.

With our easy-to-use monitoring software, users can select any ion mass, ratio, or sum that will be monitored in real-time. An easy-to-view time trace of each chemical will be displayed and recorded. Preprogrammed alarm limits can be set to provide visual and audible alarms when the abundance of a chemical exceeds a preset limit (high or low).

  • Selective, simple, and accurate process monitoring
  • Real-time monitoring of gas streams
  • No carrier gases required
  • Continuous monitoring
  • Operator controlled or autonomous unattended operation
  • Out-of-spec product alarms
  • Optional: Integrated gas chromatograph
  • Optional: Touchpanel display
  • Optional: NEMA 2 & NEMA 4X Enclosures
  • Optional: 4 – 20 mA outputs
  • MS/MS (MSn mode)
  • Fast analysis time
  • Affordable
  • Small footprint
  • Rapid sample throughput
  • High resolution
  • Wide mass range
  • Intuitive interface with programmable controls
  • Supports multiple data formats
  • Automatic mass calibration with internal standard
  • Low signal-to-noise-ratio
  • Customizable spectral export
  • Ethernet connectivity
  • Mass Range: 45–400 amu (standard)
    Custom ranges available 15–500 amu.
  • Resolution: Unit Mass
  • Max Scan Rate: 50k amu/sec
  • Scans/Sec: 1 spectra/sec (typical), 30 spectra/sec (maximum). Faster scan rates require special settings.
  • Sensitivity: Capillary 500 ppb, Preconcentrator 500 ppt using 30 sec sampling time. Measured at m/z = 91 amu xylene*.
  • Dimensions (W x H x D): 24″ x 30″ x 12″ (61 cm x 76 cm x 31 cm)
    Dimensions can be customer-specific.
  • MS/MS Capable: No collisional gas or buffer gas required
  • Power: 225W
  • Input: Supplied Universal 110/220 VAC Supply or hardwired to line power
  • Ionization Mode: Electron Ionization
  • Ionization Source: Internal EI (optional photoionization)
  • Monitoring of Multiple Gases: User programmable

*Not for all possible analytes.

REQUEST A QUOTE